|
1) Insert the spring and buffer.
2) Insert the extractor and spring.
3) Push the extractor pin in.
4) Slide the bolt into the carrier until the bolt cam pin hole in both the bolt carrier and the bolt are aligned.
5) Place the bolt cam pin by putting it in the bolt carrier, turning it one-quarter turn.
6) Drop in the firing pin to seat it.
7) Put the firing pin retaining pin in the bolt carrier.
8) Pull the bolt back.
9) Place the charging handle by engaging it, then pushing the charging handle part of the way in.
10) Slide the bolt carrier into the upper receiver.
11) Push the charging handle and bolt carrier together in the upper receiver.
12) Join the upper and lower receiver.
13) Engage the receiver pivot pin.
14) Close the upper and lower receiver groups, and engage the takedown receiver pin.
15) Put the handguards in place, and replace the sling.
|
|
  |
Designed by
Johnny
Salaza,
 |
